SupportMotoIn&boxIn&box operation

In&box operation

The In&box is the detection device required to make the airbag system work and is only compatible with In&motion airbag systems.

For the first use, turn on the In&box thanks to the switch side button. If the switch button is already ON, quickly press twice on the central button.

Activate your account and In&box here and follow the detailed activation process in this article.

IN&BOx basics

IN&BOX functions

The In&box has three different functions:

1. Activation using the ON/OFF Switch Button

You can use the button located on the left side of your In&box to turn it on for the first use only.
Make sure to push the button to ON before the first use. Don’t turn the In&box off using this left side button without double clicking to switch it off before. Never turn off your In&box by the side switch button during an update (upper leds blinking blue).

2. Press central button twice quickly

Once the In&box is turned on using the switch button, you will just have to double click quickly on the central button to turn your In&box on and off without removing your In&box from its position.

3. Automatic standby function

Thanks to this function, your In&box will switch to standby function automatically if it remains motionless for more than 5 minutes. When the In&box detects motion, it turns on automatically eliminating the need to turn it on or off! However, the In&box must be placed on a completely motionless stand.

Make sure to turn your In&box off with the central button or side switch button when using any other transportation or when the airbag product is not being worn (topcase etc…)


Below is a list of different LED colours that you may see on your In&box.


Inflator connecté (airbag fonctionnel)
            Inflator connected (airbag functional)
Inflator non connecté (airbag non fonctionnel)
       Inflator not connect (airbag not functional)
In&box éteinte (airbag non fonctionnel)
            In&box off                  (airbag not functional)


GPS actif (après quelques minutes en extérieur)
                GPS active              (after a few minutes outside)
Inflator non connecté (airbag non fonctionnel)
             GPS inactive



When the two upper LEDs are blinking red: Airbag not functional 

  • Check your In&motion subscription
  • Connect your In&box to your mobile app or Wi-Fi network
  • Contact us if the problem continues


  • Less than 5 % battery (flashing red light). Charge your In&box!
  • Less than 30% battery (about 5 hours of usage time remaining)
  • Battery charged (30 to 99 %) or In&box off
  • Battery charging (In&box plugged in)
  • Batterie charged to 100 % (In&box plugged in)


  • The two upper Leds are blinking blue alternately: the In&box is seeking for a connection to your Wi-Fi;
  • The two upper Leds are blinking blue at the same time: the synchronization and updatingprocess is in progress.

Warning, do not use the side switch button to turn the In&box off when the LEDs are blue!

In case of problem with your In&box or if the LEDs have a strange behavior, you can refer to the Help section and contact us directly if the problem continues.

You did not find what you were looking for ?


Votre navigateur est obsolète

Pour profiter du site,
merci de mettre à jour votre navigateur